Home Table of Contents

§ 912. Drilling for blasting--Rules and procedures

Oklahoma Statutes AnnotatedTitle 45. Mines and Mining

Oklahoma Statutes Annotated
Title 45. Mines and Mining
Chapter 11. Surface Mine Safety Standards
45 Okl.St.Ann. § 912
§ 912. Drilling for blasting--Rules and procedures
Currentness
The following rules and procedures shall be complied with when dealing with drilling for blasting:
1. Equipment shall be inspected each shift by a certified person designated by the operator. Equipment defects affecting safety shall be reported immediately;
2. Equipment defects affecting safety shall be corrected before the equipment is used;
3. The drilling area shall be inspected by a certified person, designated by the operator, for hazards before drilling operations are started;
4. Men shall not be on the mast while the drill is in operation;
5. Drill crews and others shall stay clear of augers or drill stems that are in motion. Persons shall not pass under or step over a moving stem or auger;
6. Receptacles or racks shall be provided for drill steel stored on drills;
7. Tools and other objects shall not be left loose on the mast or drill platform;
8. When a drill is being moved from one drilling area to another, drill steel, tools and other equipment shall be secured and the mast placed in a safe position;
9. In the event of power failure, drill controls shall be placed in the neutral position until power is restored;
10. While in operation drills shall be attended at all times;
11. Drill holes large enough to constitute a hazard shall be covered or guarded;
12. Men shall not drill from positions that hinder their access to the control levers or from insecure footing or staging or from atop equipment not designed for this purpose;
13. Bit wrenches or bit knockers shall be used to remove detachable bits from drill steel;
14. Starter steels shall be used when collaring holes with hand-held or feed-leg drills;
15. Men shall not hold the drill steel while collaring holes or rest their hands on the chuck or centralizer while drilling; and
16. Air shall be turned off and bled from the hose before hand held drills are moved from one working area to another.

Credits

Laws 1978, c. 148, § 12, emerg. eff. April 7, 1978.
45 Okl. St. Ann. § 912, OK ST T. 45 § 912
Current with emergency effective legislation through Chapter 3 of the Second Regular Session of the 59th Legislature (2024). Some sections may be more current, see credits for details.
End of Document