6 CRR-NY 220-2.2NY-CRR
STATE COMPILATION OF CODES, RULES AND REGULATIONS OF THE STATE OF NEW YORK
TITLE 6. DEPARTMENT OF ENVIRONMENTAL CONSERVATION
CHAPTER III. AIR RESOURCES
SUBCHAPTER A. PREVENTION AND CONTROL OF AIR CONTAMINATION AND AIR POLLUTION
PART 220. PORTLAND CEMENT PLANTS AND GLASS PLANTS
SUBPART 220-2. GLASS PLANTS
6 CRR-NY 220-2.2
6 CRR-NY 220-2.2
220-2.2 Definitions.
(a) For the purpose of this Subpart, the definitions of Parts 200 and 201 of this Title apply.
(b) For the purpose of this Subpart, the following definitions also apply:
(1) Glass melting furnace. A refractory vessel in which raw materials are charged, melted at high temperature, refined, and conditioned to produce molten glass. The furnace includes foundations, superstructure and retaining walls, raw material charger systems, heat exchangers, melter cooling system, exhaust system, refractory brick work, fuel supply and electrical boosting equipment, integral control systems and instrumentation, and appendages for conditioning and distributing molten glass to forming apparatuses. The forming apparatuses, including the float bath used in flat glass manufacturing and flow channels in wool fiberglass and textile fiberglass manufacturing, are not considered part of the glass melting furnace.
(2) Glass plant. Any facility using a glass melting furnace to manufacture glass.
(3) Glass produced or glass production. The weight of glass removed from a glass melting furnace.
6 CRR-NY 220-2.2
Current through December 31, 2021
| End of Document |
IMPORTANT NOTE REGARDING CONTENT CURRENCY: The "Current through" date indicated immediately above is the date of the most recently produced official NYCRR supplement covering this rule section. For later updates to this section, if any, please: consult editions of the NYS Register published after this date; or contact the NYS Department of State Division of Administrative Rules at [email protected]. See Help for additional information on the currency of this unofficial version of NYS Rules.