6 CRR-NY 212-2.5NY-CRR
6 CRR-NY 212-2.5
6 CRR-NY 212-2.5
212-2.5 Tables.
(a) Table 5 - process weight source categories.
| Process Operations for which Permissible Emission Rate is Based on Process Weight: | |
| a. | [Reserved] |
| b. | Expanded aggregate kilns (lightweight aggregate plants) |
| c. | Continuous process material dryers emitting solid particulates and water only |
| d. | Brass and bronze melting furnaces |
| e. | Ferro alloy production furnaces |
| f. | Lime kilns |
| g. | Glass production furnaces |
| h. | Graphitizing and silicon carbide furnaces |
| i. | Gypsum dryers |
| j. | Primary aluminum reduction pot lines |
(b) Table 6 - permissible emission rate.
| Process weight per hour (lb/hr) | Permissible emission rate (lb/hr) | |
| Existing emission source* | New emission source or modification | |
| 100 | 0.52 | 0.52 |
| 500 | 1.5 | 1.5 |
| 1,000 | 2.5 | 2.5 |
| 5,000 | 7.2 | 7.2 |
| 10,000 | 11.5 | 11.5 |
| 25,000 | 20.2 | 20.2 |
| 50,000 | 33.8 | 33.8 |
| 75,000 | 44.3 | 44.3 |
| 100,000 | 53.7 | 53.7 |
| 250,000 | 58.1 | 0.030 grain per standard cubic foot of undiluted exhaust gas on a dry basis |
| 500,000 | 64.4 | |
| 750,000 | 68.3 | |
| 1,000,000 | 71.1 | |
| 2,000,000 | 78.2 | |
| 5,000,000 | 88.2 | |
*Existing emission sources are ones for which applications for permits were received prior to July 1, 1973
To determine values of permissible emission rate not shown in table:
For all process weight sources up to 100,000 lb/hr, use E = 0.024P0.67
For existing process weight sources in excess of 100,000 lb/hr, use E = (39P0.082)- 50 where E = permissible emission rate; P = process weight in lb/hr.
6 CRR-NY 212-2.5
Current through December 31, 2021
| End of Document |