(a) The transporter must carry in the transport vehicle a legible paper copy, or other format approved by the department, of the most recent registration issued pursuant to this Part. The transporter must present the registration and any required waste tracking documentation relating to the waste being transported to authorized representatives of the department or to any law enforcement officer upon request.

(b) Each transport vehicle used by a registered transporter for activities regulated under this Part, must display the name of the registered transporter on both sides of the transport vehicle and the registration number of the transporter on both sides and the rear of the transport vehicle in numbers and letters at least three inches high and in a color that contrasts with the vehicle’s background color.

(c) The department may require or conduct inspections of transport vehicles as a condition of application approval or during the life of the registration.

(d) All wastes must be properly contained during transport to prevent any type of discharge to the environment.

(e) Each receiving facility must be a facility authorized to accept the waste pursuant to the requirements of the ECL and applicable regulations or a facility outside the jurisdiction of New York State authorized to operate within the state or jurisdiction where the facility is located or otherwise exempt within that State or jurisdiction.

(f) The transporter of RMW, C&D debris including, restricted-use fill, limited-use fill, and contaminated fill material, and general fill generated in the City of New York, and non-exempt drilling and production waste must comply with the tracking documentation requirements in Subpart 364-5 of this Part.

Treated RMW is considered commercial waste for the purposes of this Part.

(h) The transporter must comply with the recordkeeping and reporting requirements in Subpart 364-5 of this Part.