6 CRR-NY 361-7.3NY-CRR

STATE COMPILATION OF CODES, RULES AND REGULATIONS OF THE STATE OF NEW YORK
TITLE 6. DEPARTMENT OF ENVIRONMENTAL CONSERVATION
CHAPTER IV. QUALITY SERVICES
SUBCHAPTER B. SOLID WASTES
PART 361. MATERIAL RECOVERY FACILITIES
SUBPART 361-7. METAL PROCESSING AND VEHICLE DISMANTLING FACILITIES
6 CRR-NY 361-7.3
6 CRR-NY 361-7.3
361-7.3 Registered facilities.
(a) Facilities of the following types are subject to the registration provision of section 360.15 of this Title unless they are otherwise exempt facilities. In lieu of the requirements of section 360.19 of this Title and the operating requirements of section 361-7.4 of this Subpart, each facility must comply with the recordkeeping and reporting requirements in section 361-7.5 of this Subpart.
(1) Motor vehicle repair shops registered with the New York State Department of Motor Vehicles that store between 26 and 50 end-of-life vehicles on-site at any one time.
(2) Vehicle dismantling facilities that receive no more than 25 end-of-life vehicles per year and store no more than 50 end-of-life vehicles on-site at any one time.
(3) Scrap metal processors that store more than 1,000 cubic yards of metal.
(b) The following facilities are subject to the registration provisions of section 360.15 of this Title. In addition to the criteria outlined in Part 360 of this Title, each facility must comply with the operating requirements specified in section 361-7.4 of this Subpart and the recordkeeping and reporting requirements in section 361-7.5 of this Subpart.
(1) Motor vehicle repair shops registered with the New York State Department of Motor Vehicles that store more than 50 end-of-life vehicles on-site at any one time.
(2) Vehicle dismantling facilities that receive more than 25 end-of-life vehicles per year or store more than 50 end-of-life vehicles on-site at any one time.
(3) Mobile vehicle crushers.
6 CRR-NY 361-7.3
Current through March 15, 2022
End of Document