6 CRR-NY 361-3.9NY-CRR

OFFICIAL COMPILATION OF CODES, RULES AND REGULATIONS OF THE STATE OF NEW YORK
TITLE 6. DEPARTMENT OF ENVIRONMENTAL CONSERVATION
CHAPTER IV. QUALITY SERVICES
SUBCHAPTER B. SOLID WASTES
PART 361. MATERIAL RECOVERY FACILITIES
SUBPART 361-3. COMPOSTING AND OTHER ORGANICS RECYCLING FACILITIES
6 CRR-NY 361-3.9
6 CRR-NY 361-3.9
361-3.9 Tables.
Table 1
Parameters for Analysis
Total Kjeldahl NitrogenArsenic (As)Products must also analyze for:
AmmoniaCadmium (Cd)Fecal coliform or Salmonella sp. bacteria
NitrateChromium (total) (Cr)
Total PhosphorousCopper (Cu)
Total PotassiumLead (Pb)
pHMercury (Hg)
Total SolidsMolybdenum (Mo)
Total Volatile SolidsNickel (Ni)
Selenium (Se)
Zinc (Zn)
Table 2
Analyses Required with Permit Application
Biosolids/Sludge Used (dry tons/year)Minimum Number of Analyses
>15,00012
>2,500 to 15,0006
200 to 2,5003
25 to 1992
<251
Table 3
Analyses Required During Operation - Biosolids
Biosolids Used (dry tons/year)Minimum Number of AnalysesReduced Frequency for Low Pollutants*
>15,0002412
>2,500 to 15,000126
200 to 2,50064
25 to 19942
<2521
*Applies to facilities where two consecutive years of biosolids pollutant levels are all at or below one-half of the limits found in Table 6 if approved by the department.
Table 4
Annual Product Testing Frequency - Biosolids/Sludge/MSW
Average Product Generated (cubic yards per day) Number of Analyses
>5052
5-5012
<56
Table 5
Annual Product Testing Frequency - SSO
Average Product Generated (cubic yards per day) Number of Analyses
>5012
5-504
<52
Table 6
Pollutant Limits
ParameterMaximum Concentration mg/kg, dry weight
Arsenic (As)41
Cadmium (Cd)10
Chromium (Cr-total)1,000
Copper (Cu)1,500
Lead (Pb)300
Mercury (Hg)10
Molybdenum (Mo)40
Nickel (Ni)200
Selenium (Se)100
Zinc (Zn)2,500
6 CRR-NY 361-3.9
Current through March 15, 2021
End of Document