17 CRR-NY 6F.12NY-CRR
STATE COMPILATION OF CODES, RULES AND REGULATIONS OF THE STATE OF NEW YORK
TITLE 17. DEPARTMENT OF TRANSPORTATION
CHAPTER V. NEW YORK STATE SUPPLEMENT TO THE NATIONAL MANUAL ON UNIFORM TRAFFIC CONTROL DEVICES FOR STREETS AND HIGHWAYS—2009 EDITION
PART 6. TEMPORARY TRAFFIC CONTROL
CHAPTER 6F. TEMPORARY TRAFFIC CONTROL ZONE DEVICES
17 CRR-NY 6F.12
17 CRR-NY 6F.12
6F.12 Work Zone and Higher Fines Signs and Plaques
DELETE Paragraphs 02, 03, and 04.
INSERT the following paragraphs:
Guidance:
01A A BEGIN HIGHER FINES ZONE (R2-10) sign (See Figure 6F-3) or a FINES DOUBLED FOR SPEEDING IN WORK ZONES (NYR9-12) sign (see Sign Drawing SD-R15) should be installed at the upstream end of a work zone, and an END HIGHER FINES ZONE (R2-11) sign (see Figure 6F-3) should be installed at the downstream end of the work zone.
Option:
01B A FINES HIGHER (R2-6P) plaque (see Section 2B.17 and Figure 6F-3) may be mounted below the Speed Limit sign.
Support:
01C Section 1180(f) of the New York State Vehicle and Traffic Law discusses violations for speeding in work zones.
17 CRR-NY 6F.12
Current through December 15, 2022
| End of Document |