6 CRR-NY 750-1.25NY-CRR

OFFICIAL COMPILATION OF CODES, RULES AND REGULATIONS OF THE STATE OF NEW YORK
TITLE 6. DEPARTMENT OF ENVIRONMENTAL CONSERVATION
CHAPTER X. DIVISION OF WATER RESOURCES
SUBCHAPTER A. GENERAL
ARTICLE 3. STATE POLLUTANT DISCHARGE ELIMINATION SYSTEM
PART 750. STATE POLLUTANT DISCHARGE ELIMINATION SYSTEM (SPDES) PERMITS
SUBPART 750-1. OBTAINING A SPDES PERMIT AND POSS REGISTRATION
6 CRR-NY 750-1.25
6 CRR-NY 750-1.25
750-1.25 References.
(a) USEPA guidance publications.
USEPA Guidance on Whole Effluent Toxicity Testing - Methods for Measuring the Acute Toxicity of Effluents and Receiving Waters to Freshwater and Marine Organisms, Fourth Edition, EPA/600/4-90/027F (1993)
Short-Term Methods for Estimating the Chronic Toxicity of Effluent and Receiving Waters to Freshwater Organisms, Third Edition, EPA/600/4-91/002 (1994)
Short-Term Methods for Estimating the Chronic Toxicity of Effluent and Receiving Water to Marine and Estuarine Organisms, Second Edition, EPA/600/4-91/003 (1994)
(b) As it appears in title 33 Code of Federal Regulations (CFR) on the date shown in parentheses:
• Part 153 - Control of Pollution by Oil and Hazardous Substances, Discharge Removal - (October 5, 2001)
(c) As it appears in title 40 Code of Federal Regulations (CFR) on the date shown in parentheses:
• Part 35 - State and Local Assistance - (November 16, 2001)
• Part 122 - EPA Administered Programs: The National Pollutant Discharge Elimination System - (December 3, 2001)
• Part 123.44 - EPA Review of and Objections to State Permits - (November 16, 2001)
• Part 124.10 - Public Notice of Permit Actions and Public Comment Period - (October 5, 2001)
• Part 125 - Criteria and Standards for the National Pollutant Discharge Elimination System - (March 4, 2002)
• Part 129 - Toxic Pollutant Effluent Standards - (October 5, 2001)
• Part 130 - Water Quality Planning and Management - (January 4, 2002)
• Part 132 - Water Quality Guidance for the Great Lakes System - (October 5, 2001)
• Part 133 - Secondary Treatment Regulation - (October 5, 2001)
• Part 136 - Guidelines Establishing Test Procedures for the Analysis of Pollutants - (July 1, 2000)
• Part 144 - Underground Injection Control Program - (October 5, 2001)
• Part 146 - Underground Injection Control Program: Criteria and Standards - (October 5, 2001)
• Part 300 - National Oil and Hazardous Substances Pollution Contingency Plan - (October 5, 2001)
• Part 401 - General Provisions - (January 30, 2002)
• Part 403 - General Pretreatment Regulations for Existing and New Sources of Pollution - (October 5, 2001)
• Part 405 - Dairy Products Processing Point Source Category - (November 16, 2001)
• Part 406 - Grain Mills Point Source Category - (November 16, 2001)
• Part 407 - Canned and Preserved Fruits and Vegetables Processing Point Source Category - (November 16, 2001)
• Part 408 - Canned and Preserved Seafood Processing Point Source Category - (November 16, 2001)
• Part 409 - Sugar Processing Point Source Category - (November 16, 2001)
• Part 410 - Textile Mills Point Source Category - (November 16, 2001)
• Part 411 - Cement Manufacturing Point Source Category - (November 16, 2001)
• Part 412 - Feedlots Point Source Category - (November 16, 2001)
• Part 413 - Electroplating Point Source Category - (November 16, 2001)
• Part 414 - Organic Chemicals, Plastics, and Synthetic Fibers - (November 16, 2001)
• Part 415 - Inorganic Chemicals Manufacturing Point Source Category - (November 16, 2001)
• Part 417 - Soap and Detergent Manufacturing Point Source Category - (November 16, 2001)
• Part 418 - Fertilizer Manufacturing Point Source Category - (November 16, 2001)
• Part 419 - Petroleum Refining Point Source Category - (November 16, 2001)
• Part 420 - Iron and Steel Manufacturing Point Source Category - (November 16, 2001)
• Part 421 - Nonferrous Metals Manufacturing Point Source Category - (November 16, 2001)
• Part 422 - Phosphate Manufacturing Point Source Category - (November 16, 2001)
• Part 423 - Steam Electric Power Generating Point Source Category - (November 16, 2001)
• Part 424 - Ferroalloy Manufacturing Point Source Category - (November 16, 2001)
• Part 425 - Leather Tanning and Finishing Point Source Category - (November 23, 2001)
• Part 426 - Glass Manufacturing Point Source Category - (November 23, 2001)
• Part 427 - Asbestos Manufacturing Point Source Category - (November 23, 2001)
• Part 428 - Rubber Manufacturing Point Source Category - (November 23, 2001)
• Part 429 - Timber Products Processing Point Source Category - (November 23,2001)
• Part 430 - The Pulp, Paper, and Paperboard Point Source Category - (November 23, 2001)
• Part 432 - Meat Products Point Source Category - (November 23, 2001)
• Part 433 - Metal Finishing Point Source Category - (November 23, 2001)
• Part 434 - Coal Mining Point Source Category BPT, BAT, BCT Limitations and New Source Performance Standards - (November 23, 2001)
• Part 435 - Oil and Gas Extraction Point Source Category - (November 23, 2001)
• Part 436 - Mineral Mining and Processing Point Source Category - (November 23, 2001)
• Part 437 - The Centralized Waste Treatment Point Source Category - (November 23, 2001)
• Part 439 - Pharmaceutical Manufacturing Point Source Category - (November 23, 2001)
• Part 440 - Ore Mining and Dressing Point Source Category - (November 23, 2001)
• Part 442 - Transportation Equipment Cleaning Point Source Category - (November 23, 2001)
• Part 443 - Effluent Limitations Guidelines for Existing Sources and Standards of Performance and Pretreatment Standards for New Sources for the Paving and Roofing Materials (Tars and Asphalt) Point Source Category - (November 23, 2001)
• Part 444 - Waste Combustors Point Source Category - (November 23, 2001)
• Part 445 - Landfills Point Source Category - (November 23, 2001)
• Part 446 - Paint Formulating Point Source Category - (November 23, 2001)
• Part 447 - Ink Formulating Point Source Category - (November 23, 2001)
• Part 454 - Gum and Wood Chemicals Manufacturing Point Source Category - (November 23, 2001)
• Part 455 - Pesticide Chemicals - (November 23, 2001)
• Part 457 - Explosives Manufacturing Point Source Category - (November 23, 2001)
• Part 458 - Carbon Black Manufacturing Point Source Category - (November 23, 2001)
• Part 459 - Photographic Point Source Category - (November 23, 2001)
• Part 460 - Hospital Point Source Category - (November 23, 2001)
• Part 461 - Battery Manufacturing Point Source Category - (November 23, 2001)
• Part 463 - Plastics Molding and Forming Point Source Category - (November 23, 2001)
• Part 464- Metal Molding and Casting Point Source Category - (November 23, 2001)
• Part 465 - Coil Coating Point Source Category - (November 23, 2001)
• Part 466 - Porcelain Enameling Point Source Category - (November 23, 2001)
• Part 467 - Aluminum Forming Point Source Category - (November 23, 2001)
• Part 468 - Copper Forming Point Source Category - (November 23, 2001)
• Part 469 - Electrical and Electronic Components Point Source Category - (November 23, 2001)
• Part 471 - Nonferrous Metals Forming and Metal Powders Point Source Category - (November 23, 2001)
(d) Clean Water Act formerly referred to as the Federal Water Pollution Control Act, 33 USC 1251 et seq. - (July 1, 2001) References:
• section 1284(b) [FWPCA §§ 204(b)] - Limitations and conditions
• section 1288(b) [FWPCA §§ 208(b)] - Area wide waste treatment management - planning process
• section 1288(b)(2)(C) [FWPCA §§ 208(b)(2)(C)] - “The establishment of a regulatory program to implement requirements of 201(c) [waste treatment management area and scope]
• section 1311 [FWPCA §§ 301] - Effluent limitations
• section 1312 [FWPCA §§ 302] - Water quality related effluent limitations
• section 1313 [FWPCA §§ 303] - Water quality standards and implementation plans
• section 1314 [FWPCA §§ 304] - Information and guidelines
• section 1316 [FWPCA §§ 306] - National standards of performance
• section 1317 [FWPCA §§ 307] - Toxic and pretreatment effluent standards
• section 1318 [FWPCA §§ 308] - Records and reports; inspections
• section 1321 [FWPCA §§ 311] - Oil and hazardous substance liability
• section 1326 [FWPCA §§ 316] - Thermal discharges
• section 1342 [FWPCA §§ 402] - National pollutant discharge elimination system
• section 1343 [FWPCA §§ 403] - Ocean discharge criteria
• section 1370 [FWPCA §§ 510] - State authority
(e) Miscellaneous.
Recommended Standards for Wastewater Facilities, Policies for the Design, Review and Approval of Plans and Specifications, 1997 Edition. Design Standards for Wastewater Treatment Works, 1988, Intermediate Sized Sewage Facilities.
(f) All publications referenced in this Part are available electronically at http://www.dec.state.ny.us/website/dow/bwp/ref750/index.html.
(g) All material referenced in this Part is available for copying and inspection at the New York State Department of Environmental Conservation, Division of Water at its Central Office location in Albany County.
(h) Act means the Federal Water Pollution Control Act or Clean Water Act, 33 USC 1251 et seq., as amended, that is in effect on July 1, 2001.
(i) Ten states standards means Recommended Standards for Wastewater Facilities, Policies for the Design, Review and Approval of Plans and Specifications, 1997 Edition.
(j) Intermediate design standards means Design Standards for Wastewater Treatment Works, 1988, Intermediate Sized Sewerage Facilities.
6 CRR-NY 750-1.25
Current through September 30, 2021
End of Document