19 CRR-NY 1209.5NY-CRR

OFFICIAL COMPILATION OF CODES, RULES AND REGULATIONS OF THE STATE OF NEW YORK
TITLE 19. DEPARTMENT OF STATE
CHAPTER XXXII. DIVISION OF CODE ENFORCEMENT AND ADMINISTRATION
PART 1209. REGULATIONS AND FEES FOR FACTORY MANUFACTURED HOMES
19 CRR-NY 1209.5
19 CRR-NY 1209.5
1209.5 Insignia of approval.
(a) Form.
Prior to shipment from the factory, each factory manufactured home, model and component manufactured pursuant to these regulations shall have securely attached thereto, in a visible location as shown on the approved plans, an insignia of approval containing the following information:
(1) insignia serial number;
(2) name of manufacturer;
(3) plan approval number;
(4) model or component designation;
(5) manufacturer's serial number; and
(6) date of manufacture.
The division shall imprint the information required by paragraphs (1), (2), (3) and (4) of this subdivision prior to issuance. The information required by paragraphs (5) and (6) of this subdivision shall be imprinted by the manufacturer prior to affixing the insignia of approval.
(b) Issuance.
The insignia of approval shall be issued by the division to the manufacturer upon application, payment of the appropriate fee, and compliance with these regulations.
(c) Reporting.
The manufacturer shall report monthly to the division the disposition of the insignia of approval. Such reporting shall include with respect to each insignia issued:
(1) information completed on the issued insignia set forth in paragraphs (a)(1), (4), (5) and (6) of this section;
(2) name and address of first owner of the factory manufactured home;
(3) installation site address of the factory manufactured home;
(4) component to which the insignia is affixed; and
(5) an accounting of insignias used, returned, or on hand.
(d) Return of insignia.
The manufacturer shall return all insignia allocated for a factory manufactured home and component to the division where the manufacturer, for any reason, determines that such insignia shall no longer be needed.
(e) Revocation or discontinuance.
Insignia of approval not affixed to a factory manufactured home, model and component or not reported to the division as having been affixed by the manufacturer prior to revocation of plan approval, or discontinuance of manufacture of factory manufactured homes and components, shall be returned to the division.
(f) Copy of stamp of approval.
A registered architect or professional engineer, on plans and/or specifications signed and sealed by him/her, may certify that the stamp of approval thereon is identical to the stamp of approval emplaced on the original of said plans and specifications on file with the division and, further, that such plans and specifications have not been modified in any manner whatsoever. Such copy of the stamp of approval shall thereupon be deemed a duplicate original stamp of approval.
19 CRR-NY 1209.5
Current through October 31, 2021
End of Document