16 CRR-NY 255.225NY-CRR

OFFICIAL COMPILATION OF CODES, RULES AND REGULATIONS OF THE STATE OF NEW YORK
TITLE 16. DEPARTMENT OF PUBLIC SERVICE
CHAPTER III. GAS UTILITIES
SUBCHAPTER C. SAFETY
PART 255. TRANSMISSION AND DISTRIBUTION OF GAS
WELDING OF STEEL IN PIPELINES
16 CRR-NY 255.225
16 CRR-NY 255.225
255.225 Qualification of welding procedures.
(a) Welding must be performed by a qualified welder or welding operator in accordance with welding procedures qualified under section 5, section 12, Appendix A or Appendix B of API Standard 1104 (as described in section 10.3 of this Title), or section IX of the ASME Boiler and Pressure Vessel Code (ASME BPVC) (as described in section 10.3 of this Title) to produce welds meeting the requirements of sections 255.221 through 255.245 of this Part. The quality of the test welds used to qualify welding procedures shall be determined by destructive testing in accordance with the applicable welding standard(s).
(b) Each welding procedure must be recorded in detail, including the results of the qualifying tests. This record must be retained and followed whenever the procedure is used.
16 CRR-NY 255.225
Current through March 31, 2022
End of Document