16 CRR-NY 255.193NY-CRR

STATE COMPILATION OF CODES, RULES AND REGULATIONS OF THE STATE OF NEW YORK
TITLE 16. DEPARTMENT OF PUBLIC SERVICE
CHAPTER III. GAS UTILITIES
SUBCHAPTER C. SAFETY
PART 255. TRANSMISSION AND DISTRIBUTION OF GAS
DESIGN OF PIPELINE COMPONENTS
16 CRR-NY 255.193
16 CRR-NY 255.193
255.193 Valve installation in plastic pipe.
Each valve installed in plastic pipe must be designed so as to protect the plastic material against excessive torsional or shearing loads when the valve or shut-off is operated, and from any other secondary stresses that might be exerted through the valve or its enclosure.
16 CRR-NY 255.193
Current through March 31, 2022
End of Document