16 CRR-NY 93.6NY-CRR
16 CRR-NY 93.6
16 CRR-NY 93.6
93.6 Form of application.
The following shall be included in the application addressed to the commission:
(a) name and address of applicant;
(b) name and address of manufacturer;
(c) manufacturer's type of designation, together with a brief description of general and physical characteristics, including ratings, size, shape, adjustments and the type service to which the meter may be applied;
(d) statement of intent of sponsoring entity to use, if approved;
(e) a statement by the manufacturer or sponsoring entity certifying that the device under consideration has been tested to, and meets, all the requirements of this Part;
(f) a statement by the manufacturer, sponsoring entity or testing laboratory, certifying that:
(1) all tests have been conducted by personnel who have thorough practical and theoretical knowledge of the meters and adequate training in making precision measurements;
(2) the test equipment employed in these tests conforms to the applicable requirements specified in Standards and Standardizing Equipment, of the latest version of ANSI C12; and
(3) the accuracy of the test equipment has been established by comparison with standards whose accuracy is traceable to the National Institute of Standards and Technology.
16 CRR-NY 93.6
Current through February 28, 2023
| End of Document |
IMPORTANT NOTE REGARDING CONTENT CURRENCY: The "Current through" date indicated immediately above is the date of the most recently produced official NYCRR supplement covering this rule section. For later updates to this section, if any, please: consult editions of the NYS Register published after this date; or contact the NYS Department of State Division of Administrative Rules at [email protected]. See Help for additional information on the currency of this unofficial version of NYS Rules.