16 CRR-NY 92.10NY-CRR
16 CRR-NY 92.10
16 CRR-NY 92.10
92.10 In-service tests.
(a) All installed meters shall be subject to in-service testing to determine the performance of the meter population. These tests must be performed as specified in the Part 92 Operating Manual.
(b) Performance standards for the meter population are specified in the Part 92 Operating Manual.
(c) Any entity operating electricity meters used for billing of customers within New York State and who are eligible to be meter service providers under the commission's "Practices and Procedures for the Provision of Electric Metering in a Competitive Environment" will be responsible for the administration of an in-service test program for any meters that they have installed within the State. The program will be based solely on the population of meters installed in New York and shall not be affected by any meters installed in other states.
(d) Individual test programs for in-service meters will be filed with and approved by the commission or its designee prior to their use.
(e) Reports of meter performance will be made to the commission or its designee as specified in the Part 92 Operating Manual.
16 CRR-NY 92.10
Current through February 28, 2023
| End of Document |
IMPORTANT NOTE REGARDING CONTENT CURRENCY: The "Current through" date indicated immediately above is the date of the most recently produced official NYCRR supplement covering this rule section. For later updates to this section, if any, please: consult editions of the NYS Register published after this date; or contact the NYS Department of State Division of Administrative Rules at [email protected]. See Help for additional information on the currency of this unofficial version of NYS Rules.