16 CRR-NY 92.8NY-CRR
16 CRR-NY 92.8
16 CRR-NY 92.8
92.8 Determination of meter performance.
(a) Meter registration shall be considered indeterminate when there is any doubt as to whether the accuracy of the registration can be determined. Meter registration may also be considered indeterminate if two successive readings taken at each load fail to agree within the specified maximum error.
(b) A meter shall be reported as damaged when it is registering incorrectly due to tampering, incorrect connections, overload or damage originating from external sources.
(c) A meter shall be reported as not registering if for any reason it is found not registering at both the light load and heavy loan test points.
(d) Meter accuracy may be specified as that which is measured at a single test point or as a combined accuracy based on tests taken at multiple load points. Only one method of determining performance may be used for any meter type. The appropriate method for each meter type is specified in the Part 92 Operating Manual.
(e) Test methods used for determination of meter accuracy as specified in the Part 92 Operating Manual.
16 CRR-NY 92.8
Current through February 28, 2023
| End of Document |
IMPORTANT NOTE REGARDING CONTENT CURRENCY: The "Current through" date indicated immediately above is the date of the most recently produced official NYCRR supplement covering this rule section. For later updates to this section, if any, please: consult editions of the NYS Register published after this date; or contact the NYS Department of State Division of Administrative Rules at [email protected]. See Help for additional information on the currency of this unofficial version of NYS Rules.