15 CRR-NY 49.4NY-CRR

OFFICIAL COMPILATION OF CODES, RULES AND REGULATIONS OF THE STATE OF NEW YORK
TITLE 15. DEPARTMENT OF MOTOR VEHICLES
CHAPTER I. REGULATIONS OF THE COMMISSIONER
SUBCHAPTER D. EQUIPMENT
PART 49. SEAT SAFETY BELTS AND SHOULDER HARNESS SAFETY BELTS
15 CRR-NY 49.4
15 CRR-NY 49.4
49.4 Procedures for securing approval.
(a) Two samples of safety belts, including attachment settings, labeled package or container and instructions for installing, shall be shipped, postage prepaid, to the Commissioner of Motor Vehicles, Empire State Plaza, Albany, N.Y. 12228, together with a certification and report of testing results from any unbiased laboratory acceptable to the commissioner, that the assembled safety belt meets with the statutory requirements of section 383 of the Vehicle and Traffic Law and this Part.
(b) In lieu of approval under subdivision (a) of this section, approval shall be deemed to be granted upon the receipt by the Commissioner of Motor Vehicles of a certificate of equipment approval issued by the American Association of Motor Vehicles Administrators to the Commissioner of Motor Vehicles, Bureau of Automotive Safety Standards, Empire State Plaza, Albany, N.Y. 12228.
15 CRR-NY 49.4
Current through November 30, 2023
End of Document

IMPORTANT NOTE REGARDING CONTENT CURRENCY: The "Current through" date indicated immediately above is the date of the most recently produced official NYCRR supplement covering this rule section. For later updates to this section, if any, please: consult editions of the NYS Register published after this date; or contact the NYS Department of State Division of Administrative Rules at [email protected]. See Help for additional information on the currency of this unofficial version of NYS Rules.