12 CRR-NY 43.10NY-CRR
12 CRR-NY 43.10
12 CRR-NY 43.10
43.10 Electrical wiring and components.
Electrical wiring in or about a machine shall be of good quality and shall be properly installed. Insulation shall be resistant to moisture and of such quality and dimensions as to prevent short circuits. All electrical components shall be designed and constructed to function safely under the voltage imposed and to be protected from interference by unauthorized persons. Fuse boxes shall be locked if accessible to the public. No voltage shall be imposed greater than the maximum for which the components were designed.
12 CRR-NY 43.10
Current through March 15, 2022
| End of Document |
IMPORTANT NOTE REGARDING CONTENT CURRENCY: The "Current through" date indicated immediately above is the date of the most recently produced official NYCRR supplement covering this rule section. For later updates to this section, if any, please: consult editions of the NYS Register published after this date; or contact the NYS Department of State Division of Administrative Rules at [email protected]. See Help for additional information on the currency of this unofficial version of NYS Rules.