12 CRR-NY 4-7.2NY-CRR
12 CRR-NY 4-7.2
12 CRR-NY 4-7.2
4-7.2 Installation.
(a) Manufacturer's recommendation.
Installation of heat generating apparatus and accessories in accordance with recommendations of the manufacturer shall, if otherwise properly made, be deemed in compliance with this Part (rule).
(b) Accessibility.
Installations shall be so made as to provide reasonable accessibility for cleaning heating surfaces, removing burners, replacing motors, controls, air filters, draft regulators and other working parts, and for adjusting, cleaning and lubricating parts requiring such attention.
(c) Observation ports.
Properly located observation ports shall be provided to permit an operator to observe burner operation under all conditions.
12 CRR-NY 4-7.2
Current through March 15, 2022
| End of Document |
IMPORTANT NOTE REGARDING CONTENT CURRENCY: JULY 31, 2023, is the date of the most recently produced official NYCRR supplement covering this rule section. For later updates to this section, if any, please: consult editions of the NYS Register published after this date; or contact the NYS Department of State Division of Admisnistrative Rules at [email protected]. See Help for additional information on the currency of this unofficial version of the NYS Rules.