6 CRR-NY 450.4NY-CRR
6 CRR-NY 450.4
6 CRR-NY 450.4
450.4 Measurement tolerances.
(a) Measurement tolerances will be allowed to take into account the effects of the following factors:
(1) The consensus standard practice of reporting field sound level measurements to the nearest whole decibel.
(2) Variations resulting from commercial instrument tolerances.
(3) Variations resulting from the topography of the noise measurement site.
(4) Variations resulting from atmospheric conditions such as wind, ambient temperature and atmospheric pressure.
(5) Variations resulting from reflected sound from small objects allowed within the test site.
(6) The interpretation of the effects of the above-cited factors by enforcement personnel.
(b) Measurement tolerances shall not exceed two decibels for a given measurement.
6 CRR-NY 450.4
Current through June 30, 2022
| End of Document |
IMPORTANT NOTE REGARDING CONTENT CURRENCY: The "Current through" date indicated immediately above is the date of the most recently produced official NYCRR supplement covering this rule section. For later updates to this section, if any, please: consult editions of the NYS Register published after this date; or contact the NYS Department of State Division of Administrative Rules at [email protected]. See Help for additional information on the currency of this unofficial version of NYS Rules.