(i) batteries as described in section 374-3.1(b) of this Title;

(ii) pesticides as described in section 374-3.1(c) of this Title;

(iii) mercury-containing equipment as described in section 374-3.1(d) of this Title; and

(iv) lamps as described in section 374-3.1(e) of this Title.

(i) obtain an EPA identification number by applying to the USEPA Region II administrator using EPA form 8700-12;

(ii) obtain a detailed chemical and physical analysis of a representative sample of the hazardous remediation wastes to be managed at the site. At a minimum, the analysis must contain all of the information which must be known to treat, store or dispose of the waste according to this subpart and Part 376 of this Title, and must be kept accurate and up to date;

(iii) prevent people who are unaware of the danger from entering, and minimize the possibility for unauthorized people or livestock to enter onto the active portion of the remediation waste management site, unless the owner or operator can demonstrate to the department that:

(iv) inspect the remediation waste management site for malfunctions, deterioration, operator errors, and discharges that may be causing, or may lead to, a release of hazardous waste constituents to the environment, or a threat to human health. The owner or operator must conduct these inspections often enough to identify problems in time to correct them before they harm human health or the environment, and must remedy the problem before it leads to a human health or environmental hazard. Where a hazard is iminent or has already occurred, the owner/operator must take remedial action immediately;

(v) provide personnel with classroom or on-the-job training on how to perform their duties in a way that ensures the remediation waste management site complies with the requirements of this Part, and on how to respond effectively to emergencies;

(vi) take precautions to prevent accidental ignition or reaction of ignitable or reactive waste, and prevent threats to human health and the environment from ignitable, reactive and incompatible waste;

(vii) for remediation waste management sites subject to regulation under sections 373-2.9 through 373-2.15 and 373-2.24 of this Subpart, the owner/operator must design, construct, operate, and maintain a unit within a 100-year floodplain to prevent washout of any hazardous waste by a 100-year flood, unless the owner/operator can meet the demonstration of section 373-2.2(j)(1) of this Subpart;

(viii) not place any non-containerized or bulk liquid hazardous waste in any salt dome formation, salt bed formation, underground mine or cave;

(ix) develop and maintain a construction quality assurance program for all surface impoundments, waste piles and landfill units that are required to comply with sections 373-2.11(b)(3) and (4), 373-2.12(b)(3) and (4), and 373-2.14(c)(3) and (4) of this Subpart at the remediation waste management site, according to the requirements of section 373-2.2(k) of this Subpart;

(x) develop and maintain procedures to prevent accidents and a contingency and emergency plan to control accidents that occur. These procedures must address proper design, construction, maintenance, and operation of remediation waste management units at the site. The goal of the plan must be to minimize the possibility of, and the hazards from a fire, explosion, or any unplanned sudden or non-sudden release of hazardous waste or hazardous waste constituents to air, soil, or surface water that could threaten human health or the environment. The plan must explain specifically how to treat, store and dispose of the hazardous remediation waste in question, and must be implemented immediately whenever a fire, explosion, or release of hazardous waste or hazardous waste constituents which could threaten human health or the environment;

(xi) designate at least one employee, either on the facility premises or on call (that is, available to respond to an emergency by reaching the facility quickly), to coordinate all emergency response measures. This emergency coordinator must be thoroughly familiar with all aspect of the facility's contingency plan, all operations and activities at the facility, the location and characteristics of waste handled, the location of all records within the facility, and the facility layout. In addition, this person must have the authority to commit the resources needed to carry out the contingency plan;

(xii) develop, maintain and implement a plan to meet the requirements in subparagraphs (ii) through (vi) and (ix) through (x) of this paragraph; and

(xiii) maintain records documenting compliance with subparagraphs (i) through (xii) of this paragraph.