(1) major facility thresholds.

To avoid the requirement for a title V facility permit, the facility owner or operator must maintain actual emissions of each regulated air contaminant at less than 50 percent of the major facility thresholds, as described in section 201-2.1(b)(21) of this Part, during each 12-month period; and/or

(2) applicable State thresholds.

To avoid the control requirements of a State regulation, the facility owner or operator must maintain actual emissions of volatile organic compounds at less than 50 percent of an applicability threshold based on potential to emit in that regulation during each 12-month period.

(1) information on emission control equipment type and description, make and model, and emission sources served by the emission control unit;

(2) information on emission control equipment design, including where applicable: pollutant(s) controlled; control effectiveness; maximum design or rated capacity; inlet and outlet temperatures; concentrations of each pollutant controlled; catalyst data (type, material, life, volume, space velocity, ammonia injection rate and temperature); baghouse data (design, cleaning method, fabric material, flow rate, air/cloth ratio); electrostatic precipitator data (number of fields, cleaning method, and power output); scrubber data (type, design, sorbent type, pressure drop); other design data as appropriate; all emission source test information; and

(3) a monthly log of hours of operation including notation of any control equipment breakdowns, malfunctions, repairs, maintenance and any other deviations from design parameters.

(1) Records indicating the type and quantity of fuel combusted at the facility during every 12-month period. Facilities capable of using more than one fuel must also demonstrate that the actual emissions for every 12-month period do not exceed the thresholds listed in subdivision (a) of this section, based on the type and quantity of fuel used.

(2) Information on equipment type, make and model, maximum design process rate or maximum power input/output, all source test information, fuel heating value, percent sulfur for fuel oil, and a monthly log of hours of operation.

(1) a current list of all coatings, solvents, inks, sealants and adhesives in use. This list must include: information on the manufacturer, brand, product name or code, VOC content in pounds per gallon, hazardous air pollutants (HAPs) content in pounds per gallon, or other manufacturer’s product specifications;

(2) a description of equipment used during and after coating, solvent, ink sealant or adhesive application, including type, make and model; maximum design process rate or throughput; all emission control unit information as described in subdivision (e) of this section, as applicable, and a description of the coating/solvent application/drying method(s) employed;

(3) a monthly log of the consumption of each solvent (including solvents used in clean up and surface preparation), coating, ink, sealant and adhesive used and calculations showing compliance with the emission limits required by subdivision (a) of this section, as applicable. For the purpose of complying with this Subpart, all VOCs and HAPs consumed during the application of coatings, solvents, inks, sealants and adhesives are to be considered as being emitted to the atmosphere; and

(4) all purchase orders, invoices, and other documents to support the information in the monthly log.

(1) information on the process and equipment including the following: equipment type, description, make and model; maximum design process rate or throughput, all emission control unit information as described in subdivision (e) of this section, as applicable;

(2) a monthly log of operating hours, each raw material used and its amount, ach product produced and its production rate;

(3) purchase orders, invoices, and other documents to support information in the monthly log; and

(4) any additional information as requested by the department.