6 CRR-NY 613-1.10NY-CRR
6 CRR-NY 613-1.10
6 CRR-NY 613-1.10
613-1.10 References.
The following technical standards are incorporated by reference. With the exception of the technical standards listed in subdivisions (a) and (f) of this section, these references are available for inspection and copying at the office of the Department’s Division of Environmental Remediation, located at 625 Broadway, Albany, NY 12233 and the office of the Department of State, Division of Administrative Rules, located at One Commerce Plaza, 99 Washington Avenue, Suite 650, Albany, NY 12231. The technical standards listed in subdivisions (a) and (f) of this section are available for inspection at the office of the Department’s Division of Environmental Remediation, located at 625 Broadway, Albany, NY 12233 and the office of the Department of State, Division of Administrative Rules, located at One Commerce Plaza, 99 Washington Avenue, Suite 650, Albany, NY 12231. All of the technical standards are also available for inspection or purchase from the source listed for the given reference.
(a) American Petroleum Institute (API) 1220 L Street, NW, Washington, DC 20005-4070
(1) RP 651, Cathodic Protection of Aboveground Petroleum Storage Tanks, 3rd edition, January 2007.
(2) RP 1007, Loading and Unloading of MC 306/DOT 406 Cargo Tank Motor Vehicles, March 2001.
(3) RP 1604, Closure of Underground Petroleum Storage Tanks, 3rd edition, March 1996.
(4) RP 1615, Installation of Underground Hazardous Substances or Petroleum Storage Systems, 6th edition, April 2011.
(5) RP 1631, Interior Lining and Periodic Inspection of Underground Storage Tanks, 5th edition, June 2001.
(6) RP 1632, Cathodic Protection of Underground Petroleum Storage Tanks and Piping Systems, 1st edition, January 1983.
(7) RP 1632, Cathodic Protection of Underground Petroleum Storage Tanks and Piping Systems, 3rd edition, January 1996 (revised 2002).
(8) RP 1637, Using the API Color-Symbol System to Mark Equipment and Vehicles for Product Identification at Gasoline Dispensing Facilities and Distribution Terminals, 3rd edition, July 2006.
(9) RP 2016, Guidelines and Procedures for Entering and Cleaning Petroleum Storage Tanks, 1st edition, August 2001.
(10) RP 2200, Repairing Crude Oil, Liquefied Petroleum Gas, and Product Pipelines, 4th edition, September 2010.
(11) Standard 620, Recommended Rules for Design and Construction of Large, Welded, Low-Pressure Storage Tanks, 7th edition, September 1982 (revised April 1985).
(12) Standard 620, Design and Construction of Large, Welded, Low-Pressure Storage Tanks, 11th edition, February 2008.
(13) Standard 650, Welded Steel Tanks for Oil Storage, 7th edition, February 1984.
(14) Standard 650, Welded Steel Tanks for Oil Storage, 12th edition, March 2013.
(15) Standard 653, Tank Inspection, Repair, Alteration, and Reconstruction, 4th edition, April 2009.
(b) Fiberglass Tank and Pipe Institute (FTPI) 11150 South Wilcrest Drive, Suite 101, Houston, TX 77099-4343
(1) RP T-95-02, Remanufacturing of Fiberglass Reinforced Plastic (FRP) Underground Storage Tanks, 2nd edition, January 1995.
(c) Ken Wilcox Associates, Inc. (KWA) 1125 Valley Ridge Drive, Grain Valley, MO 64029
(1) Recommended Practice for Inspecting Buried Lined Steel Tanks Using a Video Camera, September 1999.
(d) NACE International (NACE) 1440 South Creek Drive, Houston, TX 77084-4906
(1) RP0193-2001, External Cathodic Protection of On-Grade Carbon Steel Storage Tank Bottoms, 2001 edition.
(2) SP0169-2013, Control of External Corrosion on Underground or Submerged Metallic Piping Systems, 2013 edition.
(3) SP0285-2011 (formerly RP0285), Corrosion Control of Underground Storage Tanks by Cathodic Protection, 2011 edition.
(4) TM0101-2012, Measurement Techniques Related to Criteria for Cathodic Protection of Underground Storage Tank Systems, 2012 edition.
(5) TM0497-2012, Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Piping Systems, 2012 edition.
(e) National Fire Protection Association (NFPA) 1 Batterymarch Park, Quincy, MA 02169-7471
(1) NFPA 30, Flammable and Combustible Liquids Code, 1984 edition.
(2) NFPA 30, Flammable and Combustible Liquids Code, 2012 edition.
(3) NFPA 30A, Automotive and Marine Service Station Code, 1984 edition.
(4) NFPA 30A, Code for Motor Fuel Dispensing Facilities and Repair Garages, 2012 edition.
(5) NFPA 326, Standard for the Safeguarding of Tanks and Containers for Entry, Cleaning, or Repair, 2010 edition.
(6) NFPA 385, Standard for Tank Vehicles for Flammable and Combustible Liquids, 2012 edition.
(f) Petroleum Equipment Institute (PEI) P. O. Box 2380, Tulsa, OK 74101-2380
(1) RP100, Recommended Practices for Installation of Underground Liquid Storage Systems, 2011 edition.
(2) RP200, Installation of Aboveground Storage Systems, 2013 edition.
(g) Steel Tank Institute/Steel Plate Fabricators Association (STI/SPFA) 944 Donata Court, Lake Zurich, IL 60047
(1) F841, Standard for Dual Wall Underground Steel Storage Tanks, revised January 2006.
(2) F894, ACT-100®: Specification for External Corrosion Protection of FRP Composite Steel USTs, revised September 2013.
(3) F922, Permatank®: Specification for Permatank®, revised January 2013.
(4) F961, ACT-100U®: Specification for External Corrosion Protection of Composite Steel Underground Storage Tanks, revised September 2013.
(5) R051, Cathodic Protection Testing Procedures for sti-P3® USTs, revised January 2006.
(6) R892, Recommended Practice for Corrosion Protection of Underground Piping Networks Associated with Liquid Storage and Dispensing Systems, revised January 2006.
(7) R972, Recommended Practice for the Addition of Supplemental Anodes to sti-P3® USTs, revised December 2010.
(8) SP001, Standard for the Inspection of Aboveground Storage Tanks, 5th Edition, revised September 2011.
(9) sti-P3®, Specifications for sti-P3® System for External Corrosion Protection of Underground Steel Storage Tanks, July 1983.
(10) sti-P3®, Specification and Manual for External Corrosion Protection of Underground Steel Storage Tanks, revised September 2013.
(h) Underwriters Laboratories (UL) 333 Pfingsten Road, Northbrook, IL 60062-2096
(1) UL 58, Standard for Steel Underground Tanks for Flammable and Combustible Liquids, April 1981 edition.
(2) UL 58, Standard for Steel Underground Tanks for Flammable and Combustible Liquids, December 1996 edition.
(3) UL 80, Standard for Steel Tanks for Oil-Burner Fuels and Other Combustible Liquids, September 2007 edition.
(4) UL 142, Standard for Steel Aboveground Tanks for Flammable and Combustible Liquids, January 1985 edition.
(5) UL 142, Standard for Steel Aboveground Tanks for Flammable and Combustible Liquids, December 2006 edition.
(6) UL 971, Standard for Nonmetallic Underground Piping for Flammable Liquids, February 2006 edition.
(7) UL 971A, Metallic Underground Fuel Pipe, October 2006 edition.
(8) UL 1316, Standard for Glass-Fiber-Reinforced Plastic Underground Tanks for Petroleum Products, July 1983 edition.
(9) UL 1316, Glass-Fiber-Reinforced Plastic Underground Storage Tanks for Petroleum Products, Alcohols, and Alcohol-Gasoline Mixtures, January 1994 edition.
(10) UL 1746, Standard for External Corrosion Protection Systems for Steel Underground Storage Tanks, January 2007 edition.
(11) UL 2258, Nonmetallic Tanks for Oil-Burner Fuels and Other Combustible Liquids, August 2010 edition.
(i) Underwriters Laboratories of Canada (ULC) 7 Underwriters Road, Toronto, ON, Canada M1R 3A9
(1) CAN4-S601-M84, Standard for Shop Fabricated Steel Aboveground Horizontal Tanks for Flammable and Combustible Liquids, 1984.
(2) ULC-S601-07, Standard for Shop Fabricated Steel Aboveground Tanks for Flammable and Combustible Liquids, 2007.
(3) ULC-S603-M1981, Standard for Steel Underground Tanks for Flammable and Combustible Liquids, 1981.
(4) ULC-S603-00, Standard for Steel Underground Tanks for Flammable and Combustible Liquids, 2000.
(5) ULC-S603.1-M1982, Standard for Galvanic Corrosion Protection Systems for Steel Underground Tanks for Flammable and Combustible Liquids, 1982.
(6) ULC-S603.1-11, Standard for External Corrosion Protection Systems, 2011.
(7) CAN4-S615-M83, Standard for Reinforced Plastic Underground Tanks for Flammable and Combustible Liquids, 1983.
(8) ULC-S615-98, Standard for Reinforced Plastic Underground Tanks for Flammable and Combustible Liquids, 1998.
(9) CAN4-S630-M84, Standard for Shop Fabricated Steel Aboveground Vertical Tanks for Flammable and Combustible Liquids, 1984.
(10) ULC-S660-08, Standard for Nonmetallic Underground Piping for Flammable and Combustible Liquids, 2008.
6 CRR-NY 613-1.10
Current through February 15, 2022
| End of Document |