6 CRR-NY 42.10NY-CRR
6 CRR-NY 42.10
6 CRR-NY 42.10
42.10 Plumbing, hand washing sinks, sewage, wastewater, toilets and toilet rooms.
(a) No person shall fail to permanently install plumbing in compliance with applicable plumbing codes.
(b) No person shall fail to provide an easily accessible and permanently installed hand washing sink with the following:
(1) warm water at a minimum temperature of at least 100°F (37.8°C) dispensed from a hot and cold mixing or combination faucet;
(2) permanently installed drains that are connected to effective and appropriate waste disposal areas;
(3) adequate supplies of hand-cleaning liquid or powered soap or detergent in suitable containers;
(4) adequate supplies of single-service sanitary towels or approved mechanical hand- drying devices;
(5) highly visible and understandable signs directing workers and/or employees to wash their hands thoroughly with soap or detergent before starting work and before returning to work after any interruption; and
(6) refuse containers are provided at hand washing sink locations.
(c) No person shall fail to provide a safe and effective means for the disposal of sewage and other wastewaters that complies with applicable plumbing and building codes.
(d) Toilets and toilet rooms.
(1) No person shall fail to provide convenient access to a toilet room that has an adequate number of toilets.
(i) Toilet room doors shall be tight fitting, self-closing and do not open directly into the packing room of a shucking packing or repacking facility.
(ii) Toilet rooms shall have adequate ventilation that meets applicable building code requirements.
(iii) A supply of toilet tissue shall be provided in the toilet room.
(iv) A hand-washing sink that complies with the requirements in paragraphs (b)(1)-(7) of this section shall be provided in or adjacent to the toilet room.
(v) Refuse containers shall be provided in or adjacent to the toilet room.
6 CRR-NY 42.10
Current through October 15, 2021
| End of Document |