§ 1294. Child Safety Alert Systems.
13 CA ADC § 1294Barclays Official California Code of RegulationsEffective: July 1, 2022
Effective: July 1, 2022
13 CCR § 1294
§ 1294. Child Safety Alert Systems.
(b) The child safety alert system shall be automatically activated within the first three minutes of vehicle movement or prior to the time the vehicle reaches a speed of 10 miles per hour, whichever occurs first. Once activated, the child safety alert system shall require the driver to manually contact or scan the device prior to exiting the vehicle. The vehicle shall not be equipped with any method to deactivate the device except as provided within this section.
(c) Following activation of the child safety alert system as required by subsection (b), within three minutes of the time the vehicle is stopped, the parking brakes are applied, the ignition is in the off position, and all floor-level doors are closed, the child safety alert system shall cause a tone or flashing light, or both, to be emitted from the vehicle. The tone or flashing light shall be audible or visible at least 50 feet from the vehicle with all doors and windows in the closed and locked position. Notwithstanding any permitted time delay, an activated child safety alert system shall immediately cause the required audible or visible warning, or both, to be emitted when any floor-level door is opened. The device shall cause continuous emission of the required audible or visible warning, or both, for not less than 30 continuous minutes. The driver's manual contact with, or scanning of the device, shall deactivate the device and cause the audible and visible warning to cease. Once active, the device shall not be deactivated under any circumstance or by any method except as provided within this section, prior to the driver exiting the vehicle.
(c)(1) The device may be connected to a flashing red light signal system required by Section 25257 CVC, or other required or permitted device to preclude the emission of warning tones or flashing lights while the driver is actively engaged in loading, unloading, or escorting pupils as required by law. The device shall remain activated as required by this section unless and until the driver manually contacts or scans the device. Following manual contact or scanning of the device, the device shall again be activated upon subsequent movement of the vehicle.
(c)(2) Child safety alert systems may be designed in a manner which delays the audible or visible warning for not more than three minutes from the time the vehicle is stopped, the parking brakes are applied, the ignition is set to the off position, and all floor-level doors are closed until the time the tone or flashing lights, or both, begin to be emitted. The tone or flashing lights, or both, shall cease upon manual contact or scanning of the device by the driver.
(c)(3) When the device is configured with only flashing lights, the light shall be visible from any location within the interior of the vehicle and for 360 degrees around the exterior of the vehicle. Vehicle headlamps, tail lamps, or other required exterior lighting devices may be used in fulfilling the exterior visibility requirement. The vehicle horn required by Section 27000 CVC may be used to fulfill the tone-emitting requirement.
(c)(4) The child safety alert system shall be designed so that when the device is activated, prior to the driver exiting the vehicle, sufficient lighting is immediately provided within the interior of the vehicle to facilitate a full and thorough inspection of the interior of the vehicle, including, but not limited to, interior package-carrying areas, under all seats, and throughout the driver compartment. The required interior lighting shall remain illuminated for not less than one minute following deactivation of the device and shall be extinguished automatically. Interior lights required by Section 1217 of this chapter may be used in fulfilling this requirement.
(c)(4)(A) When the design of a vehicle precludes configuration of the device to ensure illumination of the interior of the vehicle as required, the driver shall be responsible to ensure sufficient illumination is provided. Any design preclusion shall be certified by the vehicle manufacturer or an independent engineer, in writing. A legible copy of the certification shall be carried on the vehicle. The original certification shall be retained by the vehicle operator or motor carrier for the duration of time the vehicle is in their possession and transferred to the next operator upon sale or change of possession of the vehicle. A legible copy or the original certification shall be made available for inspection by any authorized employee of the department, a parent, or guardian of a pupil transported on the vehicle, or any interested member of the public.
(d) The child safety alert system shall be permanently mounted at the rearmost portion of the interior of the vehicle in a manner which ensures the device remains secure during all normal modes of vehicle operation. The device and mounting shall be secure, resistant to tampering, and of sufficient strength and durability to withstand normal and anticipated movement of the vehicle without detriment to the device or mounting integrity.
(e) A child safety alert system shall be capable of operation under all reasonably anticipated conditions of temperature, time, vehicle loading, or vehicle status. Any such device may be powered by mechanical, electrical, or electro-mechanical means of sufficient measure to ensure the device and all required warning tones and lamps function as required and remain in operation for the duration required by this section. The device may be connected to the vehicle electrical system for power or functionality, but shall not require any item or element of design required by the Federal Motor Vehicle Safety Standards, any requirement of law, or any regulation to be disabled, removed, or rendered ineffective.
(f) Any malfunction of the child safety alert system shall be documented and retained by the motor carrier or operator of the vehicle for not less than two years. Documentation shall include a description of the malfunction, any repairs or adjustments made to restore correct functionality, and be made available for inspection upon request of any authorized employee of the California Highway Patrol.
(f)(1) A driver who encounters any device malfunction shall immediately report the malfunction to the motor carrier or operator of the vehicle. The report may be made initially via radio or other electronic communication. When verbal or other electronic notification is made, the driver shall also note the malfunction on the driver's vehicle condition report required by Section 1215, or other document submitted to the motor carrier or operator of the vehicle, to ensure proper notification.
(g)(1) A “child safety alert system” is a device located at the rearmost portion of the interior of a vehicle that requires the driver to either manually contact or scan the device before exiting the vehicle, thereby prompting the driver to inspect the entirety of the interior of the vehicle before exiting. A child safety alert system is an electronic, mechanical, or electro-mechanical device, which requires manual, electronic, or a combination of manual and electronic contact. The term ‘electronic contact’ means to swipe or scan as defined in (g)(3) of this section.
(g)(2) Manual contact means the driver makes physical contact with the device for the purpose of interacting with it. This contact may take the form of pushing a button, entering a unique personal identification code, or other means of ensuring the driver contacts the device in a manner which is recognized by the device.
(g)(3) Swipe or scan the device means the driver interacts with the device by means of a card or other electronic or electro-mechanical device, or the device conducts biometric identification of an individual person in a manner which is recognized by the device. Swiping or scanning the device must require the driver, card, or other device to be within not more than six inches of the device and prohibits the use of any device which permits deactivation of the device in any manner not permitted or required by this section.
(g)(4) Prior to the driver exiting the vehicle means the vehicle is stopped, the parking brakes are applied, the ignition is in the off position, all floor-level doors are closed, and prior to the time the driver exits the vehicle by means of a floor-level door. A driver loading or unloading pupils, or escorting pupils pursuant to Section 22112 CVC, is not deemed to have exited the vehicle for the purpose of this section.
(g)(5) Active, activate, or activated means the child safety alert system is armed and will cause a tone or flashing light, or both, to be emitted from the vehicle under the conditions and in the manner required by this section. Any device so activated shall require the driver to manually contact or scan the device prior to exiting the vehicle.
Credits
Note: Authority cited: Section 28160, Vehicle Code. Reference: Sections 28160 and 34506, Vehicle Code.
History
1. New section filed 12-28-2017; operative 1-1-2018 pursuant to Government Code section 11343.4(b)(3) (Register 2017, No. 52).
2. Amendment filed 4-22-2022; operative 7-1-2022 (Register 2022, No. 16).
This database is current through 5/10/24 Register 2024, No. 19.
Cal. Admin. Code tit. 13, § 1294, 13 CA ADC § 1294
| End of Document |