(a) In order for a remedial training course to be approved by the board, a provider shall complete an application for course approval that provides the following information to the board:
(1) Description of course contents. The course content shall be pertinent to the health and safety laws and regulations of the board. The course shall focus on the safety and sanitation of pedicure and manicure equipment.
(2) Method of instruction of course offered. Teaching methods for each course shall be described, e.g. lecture, seminar, audiovisual, etc.
(3) Proof that instructors are qualified to teach the specified course content by virtue of their prior education, training, and experience. A resume of each instructor shall be forwarded with the application for approval.
(4) The application for course approval shall state the name of the provider and location where instruction will be given.
(b) Any modifications or subsequent changes to an approved remedial training course shall meet the requirements provided in this section and are subject to approval of the board.
(c) The board shall withdraw the approval of any course for failure to comply with any provisions of this section. The withdrawal for approval shall continue until such time as the training course provider meets the requirements of this section and obtains written approval from the board.
Credits
Note: Authority cited: Section 7312, Business and Professions Code. Reference: Section 7403.2, Business and Professions Code.
1. New section filed 9-17-2007 as an emergency; operative 9-17-2007 (Register 2007, No. 38). A Certificate of Compliance must be transmitted to OAL by 3-17-2008 or emergency language will be repealed by operation of law on the following day.
2. Certificate of Compliance as to 9-17-2007 order transmitted to OAL 3-4-2008 and filed 4-16-2008 (Register 2008, No. 16).
This database is current through 4/19/24 Register 2024, No. 16.
Cal. Admin. Code tit. 16, § 973.5, 16 CA ADC § 973.5
