Home Table of Contents

§ 615.3. Protective Coatings for Corrosion Control.

23 CA ADC § 615.3Barclays Official California Code of Regulations

Barclays California Code of Regulations
Title 23. Waters
Division 2. Department of Water Resources
Chapter 6. Encroachments
Article 7. Corrosion Protection Requirements
23 CCR § 615.3
§ 615.3. Protective Coatings for Corrosion Control.
Currentness
(a) Exposed Pipeline and Casing Pipe
The coating shall be a high build modified aluminum epoxy mastic primer and top coated with a high build aliphatic urethane. The finish color shall be a type of beige, similar to the Sherwin Williams Bungalow Beige SW2032. If an alternative coating system is preferred, the applicant shall submit data sheets and details for the Department's review and approval. The type of coating shall be listed in the submitted plans and specifications and shall include the surface preparation and the thickness of the coating to be applied.
(b) Buried Pipeline and Casing Pipe
Applicant shall provide the type of coating to be applied to the carrier or casing pipe. The type of coating shall be listed in the submitted plans and specifications and shall include the surface preparation and the thickness of the coating to be applied.

Credits

Note: Authority cited: Section 12899.9, Water Code. Reference: Sections 12899.1(c) and 12899.2(b), Water Code.
History
1. New section filed 4-22-2015; operative 7-1-2015 (Register 2015, No. 17).
This database is current through 6/21/24 Register 2024, No. 25.
Cal. Admin. Code tit. 23, § 615.3, 23 CA ADC § 615.3
End of Document