§ 4148. Specifications--Biodiesel Blends.
4 CA ADC § 4148Barclays Official California Code of Regulations
4 CCR § 4148
§ 4148. Specifications--Biodiesel Blends.
Biodiesel Fuel Blends shall meet the following specifications:
(b) Biodiesel blends with a concentration from 6. to 20. volume percent biodiesel shall meet the specifications set forth by ASTM International in the latest version of the “Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)” D7467, contained in the ASTM publication entitled: Annual Book of ASTM Standards, Section 5.
(1) Absent an ASTM International specification, the CDFA shall establish specifications pursuant to Business and Professions Code, Division 5, Chapter 14, Section 13450 using the data determined upon completion of the California Energy Commission Interagency Agreement, wherein the CDFA will perform test methods and standards development for biodiesel blends greater than 20 volume percent.
(3) Biodiesel blends greater than 20. volume percent may only be sold under a developmental engine fuel variance obtained pursuant to Section 4145 of this article. Any variance granted will expire at such time as the CDFA adopts specifications for biodiesel blends greater than 20. volume percent biodiesel.
Credits
Note: Authority cited: Sections 12027 and 13450, Business and Professions Code. Reference: Sections 13401(j) and 13450, Business and Professions Code.
History
1. New section filed 7-19-2004; operative 8-18-2004 (Register 2004, No. 30).
2. Repealer and new section 4148 filed 1-24-2011; operative 2-23-2011 (Register 2011, No. 4).
3. Editorial correction of History 2 (Register 2011, No. 6).
This database is current through 4/26/24 Register 2024, No. 17.
Cal. Admin. Code tit. 4, § 4148, 4 CA ADC § 4148
End of Document |