(1) Designed, built, and equipped so as to conform with all applicable regulations; and

(2) Free from defects in materials and workmanship that causes the failure of a warranted part for a period of two years.

(1) Any warranted part that is not scheduled for replacement as required maintenance in the written instructions required by subsection (f) must be warranted for a period defined in subsection (b)(2). If any such part fails during the period of warranty coverage, it must be repaired or replaced by the responsible representative (as stated in (c)) issuing the warranty according to paragraph (4). Any such part, repaired or replaced under the warranty, must be warranted for a time not less than the remaining warranty period.

(2) Any warranted part that is scheduled only for regular inspection in the written instructions required by subsection (f) must be warranted for the warranty period defined in subsection (b)(2). A statement in such written instructions to the effect of “repair or replace as necessary” will not reduce the period of warranty coverage. Any such part, repaired or replaced under warranty, must be warranted for a time not less than the remaining warranty period.

(3) Any warranted part that is scheduled for replacement, as required maintenance in the written instructions required by subsection (f), must be warranted for the period of time prior to the first scheduled replacement point for that part. If the part fails prior to the first scheduled replacement, the part must be repaired or replaced by the responsible representative (as stated in subsection (c)) according to paragraph (4). Any such part, repaired or replaced under warranty, must be warranted for a time not less than the remainder of the period prior to the first scheduled replacement point for the part.

(4) Repair or replacement of any warranted part under the warranty provisions of this article must be performed at no charge to the owner at a warranty station.

(5) Notwithstanding the provisions of paragraph (4), warranty services or repairs, must be provided at distribution centers that are franchised to service the subject SIMW.

(6) The owner must not be charged for diagnostic labor that leads to the determination that a warranted part is in fact defective, provided that such diagnostic work is performed at a warranty station.

(7) Throughout the evaporative emissions control system's warranty period set out in subsection (b)(2), the responsible representative (as stated in subsection (c)) issuing the warranty, must maintain a supply of warranted parts sufficient to meet the expected demand for such parts.

(8) Evaporative system builder approved replacement parts must be used in the performance of any warranty maintenance or repairs and must be provided without charge to the owner. Such use will not reduce the warranty obligations of the responsible representative (as stated in subsection (c)) issuing the warranty.

(9) The use of any add-on or modified parts will be grounds for disallowing a warranty claim made in accordance with this Article. The EO Holder (as stated in subsection (c)) issuing the warranty will not be liable under this Article to warrant failures of warranted parts caused by abuse, neglect, improper maintenance, or unapproved modifications.

(10) The EO Holder (as stated in subsection (c)) issuing the warranty must provide any documents that describe that evaporative system builder's warranty procedures or policies within 15 working days of a request by the Executive Officer.

(1) Canister Mounting Brackets

(2) Carbon Canister

(3) Carburetor Purge Port Connector

(4) Clamps^*

(5) Control Cables^*

(6) Control Linkages^*

(7) Control Solenoids^*

(8) Control Valves^*

(9) Electronic Controls^*

(10) Fuel Cap

(11) Fuel Line

(12) Fuel Line Fittings

(13) Fuel Tank

(14) Liquid/Vapor Separator

(15) Pressure Relief Valves^*

(16) Purge Valves

(17) Vacuum Control Diaphragms^*

(18) Vapor Hoses

(19) All other parts not listed that may affect the evaporative emissions control system