§ 2775. Applicability.
13 CA ADC § 2775Barclays Official California Code of Regulations
13 CCR § 2775
§ 2775. Applicability.
(3) Off-road military tactical vehicles or equipment exempt from regulation under the federal national security exemption, 40 CFR, subpart J, section 90.908, are exempt from the requirements of this article. Vehicles and equipment covered by the definition of military tactical vehicle that are commercially available and for which a federal certificate of conformity has been issued under 40 CFR Part 90, subpart B, shall also be exempt from the requirements of this article; and
(1) “Aggregated Operations” means all of an operator's California facilities for which equipment purchasing decisions are centrally made. Facilities that budget and make equipment purchasing decisions independent of a government or corporate headquarters are assumed to be independent and therefore are not required to be aggregated for the purpose of determining fleet size.
(2) “Agricultural Crop Preparation Services” means packinghouses, cotton gins, nut hullers and processors, dehydrators, feed and grain mills, and other related activities that fall within the United States Census Bureau NAICS (North American Industry Classification System) definition for Industry 115114 -- “Postharvest Crop Activities,” as published in the North American Industry Classification System -- United States, 2002. For forest operations, “Agricultural Crop Preparation Services” means milling, peeling, producing particleboard and medium density fiberboard, and producing woody landscape materials and other related activities that fall within the United States Census Bureau NAICS definition for Industries 321113 (Sawmills) and 321219 (Reconstituted Wood Product Manufacturing,” as published in the North American Industry Classification System -- United States, 2007.
(3) “Agricultural Operations” means (1) the growing or harvesting of crops from soil (including forest operations) and the raising of plants at wholesale nurseries, but not retail nurseries, or the raising of fowl or animals for the primary purpose of making a profit, providing a livelihood, or conducting agricultural research or instruction by an educational institution, or (2) agricultural crop preparation services.
For purposes of this regulation, a piece of equipment that is used by its operator for both agricultural and non-agricultural operations is considered to be a piece of equipment engaged in agricultural operations, only if over half of its annual operating hours are for agricultural operations.
(4) “Airport Ground Support Equipment,” “Ground Service Equipment,” or “GSE” means any large spark-ignition engine or electric-motor powered equipment capable of and used for performing the work normally performed by an LSI engine-powered piece of equipment contained in the 24 categories of equipment included in section B.3. of Appendix 2 of the South Coast Ground Support Equipment Memorandum of Understanding, dated November 27, 2002 except that equipment that falls into the “other” category shall not be considered GSE for the purposes of this regulation. Specifically included in this definition are those categories of GSE equipment designed for on-road use, but not licensed for on-road use (“On-Road Equivalent” GSE).
(9) “Emission Control System” means any device or system employed with a new or in-use off-road LSI-engine powered piece of equipment that is intended to reduce emissions. Examples of LSI emission control systems include, but are not limited to, closed-loop fuel control systems, fuel injection systems, three-way catalysts, and combinations of the above.
(11) “Equipment Identification Number” or “EIN” means a unique identification number assigned by the Executive Officer to a piece of equipment once the piece of equipment has been reported in accordance with section 2775.2, subsection (a). The EIN is used to link all reporting and recordkeeping required under this Article.
(16) “Fleet Average Emission Level” or “FAEL” means the arithmetic mean of the combined hydrocarbon plus oxides of nitrogen emissions certification standard or verification absolute emissions level for each applicable LSI engine with an emission control system and the default emission rate for each uncontrolled LSI engine comprising an operator's fleet. LSI engines installed in equipment meeting the boneyard or retired equipment definitions shall not be included in fleet average emission level compliance calculations. For the purposes of calculating the fleet average, electric-motor powered equipment shall be considered to have combined hydrocarbon plus oxides of nitrogen emissions level of zero (0). Electric-motor powered equipment of less than 19 kilowatts shall be allowed to be included in the fleet average calculation provided that it meets the airport ground support equipment, forklift, industrial tow tractor, or sweeper/scrubber definition and performs, with similar efficiency, the same function as an LSI engine-powered piece of equipment. For the purposes of calculating the fleet average for a non-forklift fleet, each piece of On-Road Equivalent GSE shall be considered to have a combined hydrocarbon plus oxides of nitrogen emissions level as follows: 1.1 g/bhp-hr (1.5 g/kW-hr) for purposes of determining compliance with the 1/1/2009 standard; 0.8 g/bhp-hr (1.1 g/kW-hr) for purposes of determining compliance with the 1/1/2011 standard; and 0.7 g/bhp-hr (0.9 g/kW-hr) for purposes of determining compliance with the 1/1/2013 standard. For the purpose of calculating the fleet average, fleet operators shall be permitted to exclude at their discretion any electric-motor powered equipment that could otherwise be used to lower the LSI fleet's average emission level.
(17) “Forest operations” means (A) forest fire prevention activities performed by public agencies, including but not limited to, construction and maintenance of roads, fuel breaks, firebreaks, and fire hazard abatement or (B) cutting or removal or both of timber, other solid wood products, including Christmas trees, and biomass from forestlands for commercial purposes, together with all the work incidental thereto, including but not limited to, construction and maintenance of roads, fuel breaks, firebreaks, stream crossings, landings, skid trails, beds for falling trees, fire hazard abatement, and site preparation that involves disturbance of soil or burning of vegetation following forest removal activities. Forest operations include the cutting or removal of trees, tops, limbs and/or brush which is processed into lumber and other wood products, and/or for landscaping materials, or biomass for electrical power generation. Forest operations do not include conversion of forestlands to other land uses such as residential or commercial developments.
(19) “Industrial Tow Tractor” means an electric-motor powered or large spark-ignition engine-powered Class 6 truck as defined by the Industrial Truck Association. Industrial tow tractors are designed primarily to push or pull non-powered trucks, trailers, or other mobile loads on roadways or improved surfaces. Industrial tow tractors are commonly referred to as tow motors or tugs. Industrial tow tractors are distinct from airport ground support equipment tugs for the purposes of this regulation.
(23) “Limited Hours of Use equipment” or “LHU equipment” means a piece of equipment that, on a year-by-year basis, was operated in California fewer hours than the prescribed threshold established for the preceding calendar year (the 12-month period running from January 1 to December 31). The threshold for the 2010 calendar year is 251 hours. The threshold for 2011 and subsequent calendar years is 200 hours. For example, an operator would only consider that a piece of equipment had met the requirements of the LHU provisions for exclusion from a fleet average emission level calculation performed in 2014 if the piece of equipment were used fewer than 200 hours between January 1, 2013 and December 31, 2013.
(28) “Military tactical vehicles or equipment” means vehicles or pieces of equipment that meet military specifications, are owned by the U.S. Department of Defense and/or the U.S. military services or its allies, and are used in combat, combat support, combat service support, tactical or relief operations, or training for such operations.
(33) [“Off-Road Large Spark-ignition Engines” or “LSI Engines” means any engine that produces a gross horsepower of 25 horsepower or greater (greater than 19 kilowatts for 2005 and later model years) or is designed (e.g., through fueling, engine calibrations, valve timing, engine speed modifications, etc.) to produce 25 horsepower or greater (greater than 19 kilowatts for 2005 and later model years). If an engine family has models at or above 25 horsepower (greater than 19 kilowatts) and models below 25 horsepower (at or below 19 kilowatts), only the models at or above 25 horsepower (above 19 kilowatts) would be considered LSI engines. The engine's operating characteristics are significantly similar to the theoretical Otto combustion cycle with the engine's primary means of controlling power output being to limit the amount of air that is throttled into the combustion chamber of the engine. LSI engines or alternate fuel-powered LSI internal combustion engines are designed for powering, but not limited to powering, forklift trucks, sweepers, generators, and industrial equipment and other miscellaneous applications. All engines and equipment that fall within the scope of the preemption of Section 209(e)(1)(A) of the Federal Clean Air Act, as amended, and as defined by regulation of the Environmental Protection Agency, are specifically excluded from this category. Specifically excluded from this category are: 1) engines operated on or in any device used exclusively upon stationary rails or tracks; 2) engines used to propel marine vessels; 3) internal combustion engines attached to a foundation at a location for at least 12 months; 4) off-road recreational vehicles and snowmobiles; and 5) stationary or transportable gas turbines for power generation.]
A person whose usual and customary business is the rental, leasing, or sale of equipment will be deemed an operator of:
(C) Store the retired equipment at a central location, apart from operational equipment, either within the facility or elsewhere, and employ lockout/tagout controls. At a minimum, place a lockout box on either the propane connector or the positive cable to the starter battery. Operators planning to scrap a piece of equipment need not use a lockout box, but may instead sever the positive battery cable more than six inches from the connector.
(D) Record the initial hour meter reading at the time of decommission and write the date of decommission and the initial meter reading in permanent ink in a readily visible location on a non-removable surface of the piece of equipment. Additionally, record the hour meter serial number, if available. Continue to record meter readings at quarterly intervals (every three months), and sign under penalty of perjury. Retain records in accordance with the LSI recordkeeping requirements in section 2775.2.
Retired equipment may remain at the facility for up to one year. After one year, the retired equipment must either be removed from the facility or reentered into FAEL standards calculations.
(40) “Service equipment” as used in the “Operator” definition means equipment that is operated by a person whose usual and customary business is the rental, leasing, or sale of equipment and is used more than 50 percent of the time for yard operations necessary to support the equipment rental, leasing, or sales business.
Table 1. LSI Engine Retrofit System Verification Levels
Classification | Percentage Reduction (HC+NOx) | Absolute Emissions (HC+NOx) |
---|---|---|
LSI Level 1(1) | > 25%(2) | Not Applicable |
LSI Level 2(1) | > 75%(3) | 3.0 g/bhp-hr(3) |
(4.0 g/kW-hr) | ||
LSI Level 3a(1) | > 85%(4) | 0.5, 1.0, 1.5, 2.0, 2.5 g/bhp-hr (0.7, 1.3, 2.0, 2.7, 3.4 g/kW-hr) |
LSI Level 3b(5) | Not Applicable | 0.5, 1.0, 1.5, 2.0 g/bhp-hr (0.7, 1.3, 2.0, 2.7 g/kW-hr) |
Notes: |
(1) Applicable to uncontrolled engines only.
(2) The allowed verified emissions reduction is capped at 25% regardless of actual emission test values.
(3) The allowed verified reduction for LSI Level 2 is capped at 75% or 3.0 g/bhp-hr (4.0 g/kW-hr) regardless of actual emission test values.
(4) Verified in 5% increments, applicable to LSI Level 3a classifications only.
(5) Applicable to emission-controlled engines only.
Bracketed definitions are replicated for ease of use and presentation clarity from Section 1900(b), Chapter 1, or Section 2431(a), Chapter 9, of Title 13 of the California Code of Regulations.
Credits
Note: Authority cited: Sections 39001, 39002, 39003, 39500, 39600, 39601, 39602.5, 39607, 39658, 43000, 43011, 43013, 43018, 43101, 43102, 43104, 43150, 43151 and 43600, Health and Safety Code. Reference: Sections 39001, 39002, 39003, 39500, 39600, 39602.5, 39607, 39658, 43000.5, 43009, 43011, 43013, 43017, 43018, 43101, 43102, 43104 and 43151, Health and Safety Code.
History
1. New article 2 (sections 2775-2775.2) and section filed 4-12-2007; operative 5-12-2007 (Register 2007, No. 15).
2. Amendment filed 12-14-2011; operative 12-14-2011 pursuant to Government Code section 11343.4 (Register 2011, No. 50).
3. Editorial correction restoring inadvertently omitted subsection (d)(32) and renumbering subsections (Register 2012, No. 18).
4. Amendment of subsections (a)(3), (c) and (d)(5), new subsection (d)(11), repealer of subsection (d)(20), subsection renumbering, amendment of newly designated subsection (d)(16) and subsections (d)(35)(A)-(B) and (d)(38)(D), repealer of subsection (d)(40), subsection renumbering, amendment of newly designated subsection (d)(46) and amendment of Note filed 6-20-2017; operative 6-20-2017 pursuant to Government Code section 11343.4(b)(3) (Register 2017, No. 25).
5. Editorial correction of History 4 (Register 2017, No. 26).
This database is current through 4/19/24 Register 2024, No. 16.
Cal. Admin. Code tit. 13, § 2775, 13 CA ADC § 2775
End of Document |