§ 66270.17. Specific Part B Information Requirements for Surface Impoundments.
22 CA ADC § 66270.17Barclays Official California Code of Regulations
22 CCR § 66270.17
§ 66270.17. Specific Part B Information Requirements for Surface Impoundments.
Except as otherwise provided in section 66264.1, owners and operators of facilities that store, treat or dispose of hazardous waste in surface impoundments shall provide the following additional information:
(1) the liner system (except for an existing portion of a surface impoundment). If an exemption from the requirement for a liner is sought as provided by section 66264.221(b), submit detailed plans and engineering and hydrogeologic reports, as appropriate, describing alternate design and operating practices that will, in conjunction with location aspects, prevent the migration of any hazardous constituents into the ground water or surface water at any future time;
(4) The double liner and leak (leachate) detection, collection, and removal system, if the surface impoundment shall meet the requirements of section 66264.221(c) of this chapter. If an exemption from the requirements for double liners and a leak detection, collection, and removal system or alternative design is sought as provided by section 66264.221(f), (g), or (k) of this chapter, submit appropriate information;
(d) A description of how each surface impoundment, including the double liner system, leak detection system, cover system and appurtenances for control of overtopping, will be inspected in order to meet the requirements of section 66264.226(a), (b) and (d) of this chapter. This information shall be included in the inspection plan submitted under section 66270.14(b)(5);
(e) a certification by an independent, qualified, professional engineer, registered in California which attests to the structural integrity of each dike, as required under section 66264.226(c). For new units, the owner or operator shall submit a statement by an independent, qualified, professional engineer, registered in California, that the engineer will provide such a certification upon completion of construction in accordance with the plans and specifications;
(g) a description of how hazardous waste residues and contaminated materials will be removed from the unit at closure, as required under section 66264.228(a)(1). For any wastes not to be removed from the unit upon closure, the owner or operator shall submit detailed plans and an engineering report describing how sections 66264.228(a)(2) and (b) will be complied with. This information shall be included in the closure plan and, where applicable, the post-closure plan submitted under section 66270.14(b)(13);
(j) a waste management plan for EPA Hazardous Waste Nos. F020, F021, F022, F023, F026, and F027 describing how the surface impoundment is or will be designed, constructed, operated, and maintained to meet the requirements of section 66264.231. This submission shall address the following items as specified in section 66264.231:
Credits
Note: Authority cited: Sections 25150, 25159, 25159.5, 25245 and 58012, Health and Safety Code. Reference: Sections 25150, 25159 and 25159.5, Health and Safety Code; and 40 CFR Section 270.17.
History
1. New section filed 5-24-91; operative 7-1-91 (Register 91, No. 22).
2. Amendment of subsections (b) and (b)(2), new subsections (b)(4)-(7) and amendment of subsection (d) and Note filed 7-19-95; operative 8-18-95 (Register 95, No. 29).
3. Change without regulatory effect adding subsection (k) and amending Note filed 6-11-99 pursuant to Health and Safety Code section 25159.1 (Register 99, No. 24).
This database is current through 6/21/24 Register 2024, No. 25.
Cal. Admin. Code tit. 22, § 66270.17, 22 CA ADC § 66270.17
End of Document |