Home Table of Contents

§ 720. Requirements for Power Purposes.


Barclays Official California Code of Regulations Currentness
Title 23. Waters
Division 3. State Water Resources Control Board and Regional Water Quality Control Boards
Chapter 2. Appropriation of Water
Article 7. Map Requirements
23 CCR § 720
§ 720. Requirements for Power Purposes.
(a) Maps accompanying applications for power purposes shall show the point of diversion, the conduit, penstock and power house and, the point at which the water is returned to the stream.
(b) Applicants applying for more than 3 cubic feet per second direct diversion or 200 acre-feet per annum, shall submit a profile of the penstock on which appears in figures, the elevation of the nozzle if an impulse wheel is to be used, or the elevation of the water surface at the draft tube if a reaction wheel is to be used, and the elevation of the first free water surface above the penstock. The difference between these two elevations must equal the total fall to be utilized.
Note: Authority cited: Section 1058, Water Code. Reference: Sections 1252, 1260, 1261 and 1531, Water Code.
1. Amendment filed 3-10-60; effective thirtieth day thereafter (Register 60, No. 5).
2. Renumbering and amendment of former Section 720 to Section 747 and 753, and renumbering and amendment of Section 675 to Section 720 filed 1-16-87; effective thirtieth day thereafter (Register 87, No. 10). For prior history, see Register 78, No. 9.
This database is current through 6/17/22 Register 2022, No. 24
23 CCR § 720, 23 CA ADC § 720
End of Document