Upon submission of a completed application accompanied by the required test report and other technical data as specified in Section 1390, and the required fee as specified in Section 1398, the State Architect shall grant certification to those valves which have successfully complied with the provisions of S. B. Standard No. 12-16-2, and have been shown to comply with the intent and purpose of these regulations. No certification shall be issued for any valve which does not conform to all of the appropriate provisions of these regulations. Valve certification may include variations in size and physical dimensions as may be allowed by the State Architect. DSA shall notify the manufacturer within 10 working days if additional information and/or data are required to complete the submittal. Within 60 days DSA shall complete the review of the submittal and provide written notice to the manufacturer of DSA certification of the proposed valves if all the requirements of this chapter and S.B. 12-16-2 have been fulfilled.