Home Table of Contents

§ 1086. Regrooved Tire Design and Construction.

13 CA ADC § 1086Barclays Official California Code of Regulations

Barclays California Code of Regulations
Title 13. Motor Vehicles (Refs & Annos)
Division 2. Department of the California Highway Patrol
Chapter 4. Special Equipment
Article 14. Tires and Rims
13 CCR § 1086
§ 1086. Regrooved Tire Design and Construction.
Currentness
Regrooved tires shall be designed and constructed as follows:
(a) Design. No tire shall be regrooved unless it is designed to permit a renewed or newly generated tread pattern and is marked “regroovable” at the time of manufacture or it has a retread designed to be regrooved and is marked “regroovable” when retreaded.
(b) Construction. Regrooved tires shall be constructed with at least a 3/32-in. (2.4-mm) layer of tread material between the cord structure and the new grooves, which shall be not less than 3/16 in. (4.8 mm) nor more than 5/16 in. (7.9 mm) wide. Regrooved tires shall not show evidence of ply, tread, or sidewall separation; sidewall wear that exposes the fabric; or tread or groove cracks extending to the fabric.

Credits

Note: Authority cited: Section 27500, Vehicle Code. Reference: Section 27461, Vehicle Code.
History
1. Renumbering of Section 1087 to Section 1086 filed 1-18-82; effective thirtieth day thereafter (Register 82, No. 4).
This database is current through 5/10/24 Register 2024, No. 19.
Cal. Admin. Code tit. 13, § 1086, 13 CA ADC § 1086
End of Document