§ 1029. Installation Requirements.
13 CA ADC § 1029Barclays Official California Code of Regulations
13 CCR § 1029
§ 1029. Installation Requirements.
Sirens and speakers installed on authorized emergency vehicles shall be mounted as follows:
(a) Electromechanical and Mechanical Sirens. Class A electromechanical and mechanical sirens shall be mounted outside, between the grille and radiator, or under the hood. Class B electromechanical and mechanical sirens shall be mounted outside or between the grille and the radiator. Mechanical motorcycle sirens that do not operate when the vehicle is stationary shall not be installed on motorcycles manufactured after January 1, 1981.
(b) Electronic Sirens. Class A and B electronic sirens installed after January 1, 1976, shall be mounted outside or with the horn opening facing forward ahead of the radiator with a relatively open path for the sound to project forward. The horn axis shall be parallel to the road and vehicle centerline.
(e) Transfer. A siren, except a motorcycle mechanical siren, meeting the requirements established by the department at the time it was first installed on an authorized emergency vehicle may be transferred between authorized emergency vehicles by the owner or sold by the owner for use on other authorized emergency vehicles.
Credits
Note: Authority cited: Section 26103, Vehicle Code. Reference: Sections 24012 and 26103, Vehicle Code.
This database is current through 5/10/24 Register 2024, No. 19.
Cal. Admin. Code tit. 13, § 1029, 13 CA ADC § 1029
End of Document |