(a) Date of test report.

(b) Date tests were conducted.

(c) Standard to which the device was tested.

(d) Description of the device.

(e) Type of material used for each major component.

(f) List of the marks of identification, including size, location, and method of marking.

(g) One photograph or halftone print of the assembled and disassembled device.

(h) Actual results obtained for each test or measurement required by applicable sections of the Federal Motor Vehicle Safety Standard and referenced specifications. Words such as “complies,” “passed,” “less than,” or “more than” are not acceptable where minimum or maximum requirements are specified in measurable units, except for dimensions checked by go-no-go gages.