Home Table of Contents

§ 125.06. Compliance with Changes in Certification Requirements.

13 CA ADC § 125.06Barclays Official California Code of Regulations

Barclays California Code of Regulations
Title 13. Motor Vehicles (Refs & Annos)
Division 1. Department of Motor Vehicles
Chapter 1. Department of Motor Vehicles
Article 2.55. California Ignition Interlock Device Program
13 CCR § 125.06
§ 125.06. Compliance with Changes in Certification Requirements.
(a) A manufacturer of an ignition interlock device certified by the department shall comply with any regulatory changes within 60 days from adoption for the device to remain certified.
(b) If there are any changes to the list of authorized installers, a manufacturer shall submit an updated list to the department within 10 days of the change.
(c) If there are any changes to an adopted fee schedule, a manufacturer shall submit the updated fee schedule to the department within 30 days of the changes.
(d) If there are any changes to the manufacturer's stamp, a manufacturer shall provide an imprint of the new stamp to the department 30 days prior to its use.
(e) If there are any changes to the toll-free telephone number, a manufacturer shall provide the new toll-free telephone number to the department 90 days prior to its use.
(f) If there are any changes to any information provided on the Application for Certification of Ignition Interlock Device form (DL 9) (REV. 4/2000), a manufacturer shall submit an updated application within 30 days of the changes.

Credits

Note: Authority cited: Section 1651, Vehicle Code. Reference: Section 13386, Vehicle Code.
History
1. New section filed 10-29-2003; operative 11-28-2003 (Register 2003, No. 44).
This database is current through 5/10/24 Register 2024, No. 19.
Cal. Admin. Code tit. 13, § 125.06, 13 CA ADC § 125.06
End of Document