Home Table of Contents

§ 1142. Design and Plan Requirements - Electrical.


Barclays Official California Code of Regulations Currentness
Title 25. Housing and Community Development
Division 1. Housing and Community Development
Chapter 2. Mobilehome Parks and Installations
Article 3. Electrical Requirements
25 CCR § 1142
§ 1142. Design and Plan Requirements - Electrical.
(a) Electrical plans shall include a single line diagram of the electrical equipment to be installed, altered or changed. Complete load calculations of the electrical system shall be provided with plans.
(b) Complete engineering plans, specifications, calculations and supporting data, stamped and signed by an electrical engineer, shall be submitted when the park's electrical main service or any of the electrical wiring system exceeds the voltage of the secondary system.
(c) Any person applying for a permit to install additional electrical equipment in a park shall submit the following information with the application for a permit to construct:
(1) The size of the feeder circuit and overcurrent protection of that feeder circuit; and
(2) The number of lots and the load of any other electrical equipment supplied by the feeder circuit.
Note: Authority cited: Section 18300, Health and Safety Code. Reference: Sections 18501 and 18670, Health and Safety Code.
1. New section filed 2-19-2013; operative 4-1-2013 (Register 2013, No. 8). For prior history, see Register 2004, No. 28.
This database is current through 7/29/22 Register 2022, No. 30
25 CCR § 1142, 25 CA ADC § 1142
End of Document