§ 1335. Load Bearing Supports, Manufacturer's Installation Instructions.
25 CA ADC § 1335Barclays Official California Code of Regulations
25 CCR § 1335
§ 1335. Load Bearing Supports, Manufacturer's Installation Instructions.
MH-units manufactured on or after October 7, 1973, shall be installed in accordance with the approved manufacturer's installation instructions. Individual load bearing supports of a support system shall provide the support required by the manufacturer's instructions, including locations where there are concentrated loads. The footing areas shall be sized in accordance with section 1334 to support the loads shown in the manufacturer's installation instructions.
Credits
Note: Authority cited: Sections 18300 and 18613, Health and Safety Code. Reference: Section 18613, Health and Safety Code.
History
1. Renumbering and amendment of former section 1336 to new section 1335 filed 9-8-94 as an emergency; operative 9-19-94 (Register 94, No. 36). A Certificate of Compliance must be transmitted to OAL by 1-17-95 or emergency language will be repealed by operation of law on the following day.
2. Renumbering and amendment of former section 1336 to new section 1335 and amendment of Note refiled 1-18-95 as an emergency; operative 1-17-95 (Register 95, No. 3). A Certificate of Compliance must be transmitted to OAL by 5-17-95 or emergency language will be repealed by operation of law on the following day.
3. Certificate of Compliance as to 1-18-95 order transmitted to OAL 3-31-95 and filed 5-12-95 (Register 95, No. 19).
4. Amendment of section heading, section and Note filed 7-6-2004; operative 7-6-2004 pursuant to Government Code section 11343.4 (Register 2004, No. 28).
This database is current through 5/10/24 Register 2024, No. 19.
Cal. Admin. Code tit. 25, § 1335, 25 CA ADC § 1335
| End of Document |