§ 2755. Permeation Emission Standards.
13 CA ADC § 2755Barclays Official California Code of RegulationsEffective: January 1, 2023
Effective: January 1, 2023
13 CCR § 2755
§ 2755. Permeation Emission Standards.
On or after the model year set out herein, and through model year 2023, fuel tanks and fuel lines used on equipment subject to this section must not exceed the following permeation rates:
Permeation Emission Standards
(grams per meter2 per day)
Effective Date Model Year | Applicability | Requirement 1 |
2007 | Small off-road engines with displacements ≤ 80 cc | Fuel tank permeation emissions shall not exceed 2.0 grams per square meter of internal surface area per day as determined by TP-901. |
2020 | Small off-road engines with displacements ≤ 80 cc | Fuel lines shall meet the requirements of section 2754(b)(2), except that the permeation emission standard for fuel lines used on chainsaws is 225 g•m-2•day-1. |
1 Permeation rate must be measured to two significant digits.
(b) The test procedure for determining compliance with the fuel tank permeation emission standard is TP-901, which is incorporated by reference herein and specified in section 2758. The test procedure used to determine compliance with the fuel line permeation emission standard is SAE J1737, SAE J30, SAE J1527, or, only for fuel lines with inner diameter 4.75 mm or less, SAE J2996.
Credits
Note: Authority cited: Sections 39600, 39601 and 43013, Health and Safety Code. Reference: Section 43013, Health and Safety Code.
History
1. New section filed 9-20-2004; operative 10-20-2004 (Register 2004, No. 39).
2. Amendment of section heading and section filed 11-13-2017; operative 1-1-2018 (Register 2017, No. 46).
3. Editorial correction of Table (Register 2018, No. 15).
4. Amendment of first paragraph and subsection (b) and new subsection (c) filed 9-14-2022; operative 1-1-2023 (Register 2022, No. 37).
This database is current through 4/12/24 Register 2024, No. 15.
Cal. Admin. Code tit. 13, § 2755, 13 CA ADC § 2755
End of Document |